CARBON-FIBER RODS, SHAFTS, SCOOP HANDLES, AND ACCESSORIES:

Refine Search:

Detector:
 Minelab Equinox 600/800 (10)
 XP Deus (3)
 Minelab Gold Monster 1000 (1)
 Minelab GPX 4500/4800/5000 (3)
 Minelab Excalibur (1)
 Garrett AT-series (3)
 Minelab Equinox 700/900 (3)
 Minelab Manticore (3)
 Minelab CTX 3030 (5)
 Minelab GPX 6000 (2)
 Tarsacci MDT 8000 (1)
 T-Rex (All Models) (1)
 Stealth (All Models) (1)
 Xtreme (All Models) (1)
 CooB (All models which require a 30.5mm (1.2") dia. scoop handle) (1)
 CooB (All models which require a 35mm (1.35") dia. scoop handle) (1)
 Stavr (All Models) (1)
 Universal (3)

Brand:
 Minelab (28)
 XP (3)
 Garrett (3)
 Tarsacci (1)
 T-Rex (1)
 Stealth (1)
 Xtreme (1)
 CooB (2)
 Stavr (1)
 Universal (3)

Products:
 Upper Shafts (2)
 Complete Shafts (10)
 Lower Rods/Shafts (18)
 Sand Scoop Handles (6)
 Accessories (11)
 Apparel (2)

Minelab Equinox 600/800 Carbon-Fiber Upper Shaft

This upper shaft for the Minelab Equinox is a one-piece upper that replaces both the upper and middle shaft sections of the stock shaft. Includes 4 cuff adjustment holes, one control box hole, and a rubber end cap.
(CLICK FOR MORE INFORMATION)

Model Number: EQ.US-01
Price: $79 + shipping (black), $89 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 600/800 "Counterweight-Ready" Carbon-Fiber Upper Shaft

This upper shaft for the Minelab Equinox is a one-piece upper that replaces both the upper and middle shaft sections of the stock shaft. Includes 4 cuff adjustment holes, one control box hole, and threaded butt-end (for counterweight compatibility) and a threaded end cap.
(CLICK FOR MORE INFORMATION)

Model Number: EQ.US-02
Price: $89 + shipping (black), $99 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 600/800 Complete Carbon-Fiber Shaft System

This complete shaft system for the Minelab Equinox replaces the entire stock shaft. It includes a one-piece upper that replaces both the upper and middle shaft sections of the stock shaft, plus a standard-length (26") lower rod, and is 22% (2.2 oz.) lighter, overall, than the stock shaft. Custom, three-piece shafts are also available for an additional $20.
(CLICK FOR MORE INFORMATION)

Model Number: EQ.CS-01
Price: $129 + shipping (black), $149 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 600/800 "Counterweight-Ready" Complete Carbon-Fiber Shaft System

This complete shaft system for the Minelab Equinox replaces the entire stock shaft. It includes a one-piece upper that replaces both the upper and middle shaft sections of the stock shaft, plus a standard-length (26") lower rod, and is 22% (2.2 oz.) lighter, overall, than the stock shaft. Custom, three-piece shafts are also available for an additional $20.
(CLICK FOR MORE INFORMATION)

Model Number: EQ.CS-02
Price: $139 + shipping (black), $159 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 600/800 Complete Carbon-Fiber S-Shaft System

NEW! This complete S-shaft system for the Minelab Equinox replaces the entire stock shaft. It includes a one-piece upper S-shaft, that replaces both the upper and middle shaft sections of the stock shaft, plus a standard-length (26") lower rod. Custom, three-piece shafts are also available for an additional $20.
(CLICK FOR MORE INFORMATION)

Model Number: EQ.CS-03
Price: $159 + shipping (black), $179 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 600/800 "Counterweight-Ready" Complete Carbon-Fiber S-Shaft System

NEW! This complete S-shaft system for the Minelab Equinox replaces the entire stock shaft. It includes a one-piece upper that replaces both the upper and middle shaft sections of the stock shaft, plus a standard-length (26") lower rod. Custom, three-piece shafts are also available for an additional $20. (CLICK FOR MORE INFORMATION)

Model Number: EQ.CS-04
Price: $169 + shipping (black), $189 + shipping (colored).
Availability: IN STOCK

XP Deus II Complete Carbon-Fiber S-Shaft System

NEW! This complete S-shaft system for the XP Deus II replaces the entire stock shaft. It includes a custom-designed, all-carbon-fiber arm cuff.
(CLICK FOR MORE INFORMATION)

Model Number: XP.D2-01
Price: $259 + shipping (black), $279 + shipping (red/black).
Availability: IN STOCK

Minelab Gold Monster 1000 Complete Carbon-Fiber Shaft System

NEW! This complete shaft system for the Minelab Gold Monster 1000 replaces the entire stock shaft. It includes a one-piece upper, plus a standard-length (26") lower rod. Custom, three-piece shafts are also available for an additional $20.
(CLICK FOR MORE INFORMATION)

Model Number: GM.CS-01
Price: $129 + shipping (black).
Availability: IN STOCK

Minelab GPX 4500/4800/5000 Complete Carbon-Fiber Shaft System

NEW! This complete shaft system for the Minelab GPX 4500/4800/5000 replaces the entire stock shaft. It includes a one-piece upper, plus a standard-length (26") lower rod.
(CLICK FOR MORE INFORMATION)

Model Number: G45.CS-01
Price: $129 + shipping (black).
Availability: IN STOCK

Minelab Excalibur Complete Carbon-Fiber Shaft System

NEW! This complete shaft system for the Minelab Excalibur replaces the entire stock shaft, and is of the "Florida" style. It includes a one-piece upper, a standard-length (26") lower rod, plus a 12" detachable section beyond the arm cuff, for attachment of the control pod and battery pod. Arm cuff and handle available upon request, for additional cost.
(CLICK FOR MORE INFORMATION)

Model Number: EXCAL.CS-01
Price: $129 + shipping (black), $139 + shipping (green/black)
Availability: IN STOCK

Garrett AT-series Complete Carbon-Fiber S-Shaft

NEW! This complete shaft system for the Garrett AT Pro/Gold/Max replaces the entire stock shaft. It includes a one-piece upper S-shaft that replaces both the upper and middle shaft sections of the stock shaft, plus a standard-length (20") lower rod, and is 32% (4.3 oz.) lighter, overall, than the stock shaft. Custom, three-piece shafts are also available for an additional $20.
(CLICK FOR MORE INFORMATION)

Model Number: GA.CS-01
Price: $159 + shipping (black), $179 + shipping (colored).
Availability: IN STOCK

Garrett AT-series "Counterweight-Ready" Complete Carbon-Fiber S-Shaft

NEW! This complete shaft system for the Garrett AT Pro/Gold/Max replaces the entire stock shaft. It includes a one-piece upper S-shaft that replaces both the upper and middle shaft sections of the stock shaft, plus a standard-length (20") lower rod, and is 32% (4.3 oz.) lighter, overall, than the stock shaft. Custom, three-piece shafts are also available for an additional $20.
(CLICK FOR MORE INFORMATION)

Model Number: GA.CS-02
Price: $169 + shipping (black), $189 + shipping (colored).
Availability: IN STOCK

XP Deus II Carbon-Fiber Lower Rod

This lower rod is compatible with our XP Deus II complete shafts only
(CLICK FOR MORE INFORMATION)

Model Number: XP-01
Price: $69 + shipping (black).
Availability: IN STOCK

Minelab Equinox 600/800 Carbon-Fiber Lower Rod (26 inches)

This rod is a direct replacement for the factory rod, but 11% lighter.
(CLICK FOR MORE INFORMATION)

Model Number: EQ-01
Price: $69 + shipping (black), $79 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 600/800 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

We can build a custom lower rod to your required length, up to 30 inches.
(CLICK FOR MORE INFORMATION)

Model Number: EQ-02
Price: $79 + shipping (black).
Availability: IN STOCK

Minelab Equinox 700/900 Carbon-Fiber Lower Rod (22 inches)

This lower rod is compatible with both the Minelab stock Equinox 700/900 shaft, AND with our two-piece middle/lower shaft assembly for the 700/900.
(CLICK FOR MORE INFORMATION)

Model Number: EQ-03
Price: $59 + shipping (black), $69 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 700/900 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

We can build a custom lower rod to your required length, up to 26 inches.
(CLICK FOR MORE INFORMATION)

Model Number: EQ-04
Price: $65 + shipping (black), $75 + shipping (colored).
Availability: IN STOCK

Minelab Manticore Carbon-Fiber Lower Rod (23 1/4 inches)

This lower rod is compatible with both the Minelab stock Manticore shaft, AND with our two-piece middle/lower shaft assembly for the Manticore.
(CLICK FOR MORE INFORMATION)

Model Number: MC-01
Price: $79 + shipping (black), $89 + shipping (colored).
Availability: IN STOCK

Minelab Manticore "Tall Man" Custom-Length Carbon-Fiber Lower Rod

We can build a custom lower rod to your required length, up to 27 1/4 inches.
(CLICK FOR MORE INFORMATION)

Model Number: MC-02
Price: $85 + shipping (black), $95 + shipping (colored).
Availability: IN STOCK

Minelab Equinox 700/900 Two-Piece Carbon-Fiber Lower Shaft

This two-piece shaft assembly is a direct replacement for the factory middle and lower rods.
(CLICK FOR MORE INFORMATION)

Model Number: EQ.2P-01
Price: $99 + shipping (black), $109 + shipping (colored).
Availability: IN STOCK

Minelab Manticore Two-Piece Carbon-Fiber Lower Shaft

This two-piece shaft assembly is a direct replacement for the factory middle and lower rods.
(CLICK FOR MORE INFORMATION)

Model Number: MC.2P-01
Price: $109 + shipping (black), $119 + shipping (colored).
Availability: IN STOCK

Garrett AT- and Ace-Series Two-Piece Carbon-Fiber Lower Shaft

This two-piece shaft is a direct replacement for the factory middle and lower rods.
(CLICK FOR MORE INFORMATION)

Model Number: GA-01
Price: $79 + shipping (black), $89 + shipping (colored).
Availability: IN STOCK

Minelab CTX 3030 Carbon-Fiber Lower Rod (32 inches)

This rod serves as a direct replacement for -- and improvement to -- the original manufacturer's rod.
(CLICK FOR MORE INFORMATION)

Model Number: C3-01
Price: $89 + shipping (black), $99 + shipping (colored).
Availability: IN STOCK

Minelab CTX 3030 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

We can build a custom lower rod to your required length, up to 38 inches.
(CLICK FOR MORE INFORMATION)

Model Number: C3-02
Price: $119 + shipping.
Availability: 3-4 weeks for production/assembly

Minelab CTX 3030 Two-Piece Carbon-Fiber Travel Rod

These rods are designed to fit into luggage, and can be built to any custom length (up to 38").
(CLICK FOR MORE INFORMATION)

Model Number: C3-03
Price: $139 + shipping.
Availability: 3-4 weeks for production/assembly

Minelab GPX 4500/4800/5000 Carbon-Fiber Lower Rod (26 inches)

This rod serves as a direct replacement for the original manufacturer's rod.
(CLICK FOR MORE INFORMATION)

Model Number: G45-01
Price: $79 + shipping (black).
Availability: IN STOCK

Minelab CTX 4500/4800/5000 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

We can build a custom lower rod to your required length, up to 30 inches.
(CLICK FOR MORE INFORMATION)

Model Number: G45-02
Price: $89 + shipping (black).
Availability: IN STOCK

Minelab GPX 6000 Carbon-Fiber Lower Rod (26 inches)

This rod serves as a direct replacement for the original manufacturer's rod.
(CLICK FOR MORE INFORMATION)

Model Number: G6-01
Price: $79 + shipping (black).
Availability: IN STOCK

Minelab GPX 6000 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

We can build a custom lower rod to your required length, up to 30 inches.
(CLICK FOR MORE INFORMATION)

Model Number: G6-02
Price: $89 + shipping (black).
Availability: IN STOCK

Tarsacci MDT 8000 Two-Piece Carbon-Fiber Lower Shaft

This two-piece shaft is a direct replacement for the factory middle and lower rods.
(CLICK FOR MORE INFORMATION)

Model Number: TAR-01
Price: $89 + shipping.
Availability: IN STOCK

Carbon-Fiber Sand Scoop Handles for T-Rex scoops

46 1/2" Sand Scoop Handle

Model Number: SS-01
Price: $135 + shipping.
Availability: IN STOCK

Carbon-Fiber Sand Scoop Handles for Stealth scoops

46 1/2" Sand Scoop Handle

Model Number: SS-02
Price: $135 + shipping.
Availability: IN STOCK

Carbon-Fiber Sand Scoop Handles for Xtreme scoops

46 1/2" Sand Scoop Handle

Model Number: SS-03
Price: $135 + shipping.
Availability: IN STOCK

Carbon-Fiber Sand Scoop Handles for CooB scoops (30.5mm/1.2" dia.)

46 1/2" Sand Scoop Handle

Model Number: SSCoob-01
Price: $135 + shipping.
Availability: IN STOCK

Carbon-Fiber Sand Scoop Handles for CooB scoops (35mm/1.35" dia.)

46 1/2" Sand Scoop Handle

Model Number: SSCoob-02
Price: $135 + shipping.
Availability: IN STOCK

Carbon-Fiber Sand Scoop Handles for Stavr scoops

46 1/2" Sand Scoop Handle

Model Number: SS-04
Price: $135 + shipping.
Availability: IN STOCK

Counterweight Tube (lead weighting not included)

The carbon-fiber counterweight tube is compatible with any of our "counterweight-ready" shafts, and is available in customized lengths per user preference.
(CLICK FOR MORE INFORMATION)

Model Number: EQACC-03
Price: $35 + shipping.
Availability: IN STOCK

Counterweight Tube (with lead weighting included)

The counterweight tube is compatible with any of our "counterweight-ready" shafts, and is available in customized lengths/weights per user preference.
(CLICK FOR MORE INFORMATION)

Model Number: EQACC-04
Price: $45 + shipping.
Availability: IN STOCK

Herke Arm Cuff

This black aluminum arm cuff from Jeff Herke is compatible with any of our Equinox shafts, with an optional padded neoprene cover also available.
(CLICK FOR MORE INFORMATION)

Model Number: EQACC-05
Price: $65, FREE U.S. Shipping (add $20 for the padded neoprene cover).
Availability: IN STOCK

"Steve's" Carbon-Fiber Arm Cuff

NEW! Our all-carbon-fiber black aluminum arm cuff -- initially designed for our Deus shafts -- is compatible with any 22mm (7/8") detector shaft (including Steve's Equinox 600/800, Excalibur, Gold Monster, and GPX 4500/4800/5000 shafts). An optional, padded neoprene cover also available for $20.
(CLICK FOR MORE INFORMATION)

Model Number: UN-01
Price: $65 + shipping (add $20 for the padded neoprene cover).
Availability: IN STOCK

RCDigs Mount, for our XP Deus Carbon-Fiber Shaft

NEW! The RCDigs mount provides a durable, unique, fully secure mounting option for the XP Deus remote control unit; available in right-handed, left-handed, and straight configurations.
(CLICK FOR MORE INFORMATION)

Model Number: XPACC-01
Price: $40, FREE U.S. Shipping
Availability: IN STOCK

Steve's Detector Rods Ball Caps

100% cotton, fully adjustable, embroidered "Dad" hats, with pre-curved bill and padded sweat band(CLICK FOR MORE INFORMATION)

Model Number: A-01
Price: $19.50 + shipping (Navy, or ACU Camo).
Availability: IN STOCK

Steve's Detector Rods T-shirts

100% cotton, double-stitched collar, sleeve, and hem(CLICK FOR MORE INFORMATION)

Model Number: A-02
Price: $15.50 + shipping (Navy, light gray, Army green, light pink, light blue).
Availability: IN STOCK

Cam Lock

This cam lock is a heavy-duty, clamp-type cam lock made of high-strength, injection-molded nylon, and includes 316 marine-grade stainless-steel hardware.

Model Number: CL-01
Price: $15.00 + shipping.
Availability: IN STOCK

Rubber Washers, for all Steve's Detector Rods Lower Rods

This washer measures 19mm in diameter, by 3mm thick, and has a hole diameter of 10mm.

Model Number: EQACC-01
Price: $5 + shipping, per 10-pack.
Availability: IN STOCK

Spacers, for all Steve's Detector Rods Lower Rods

This spacer measures 18mm in diameter, by 0.2mm thick, and has a hole diameter of 10mm.

Model Number: EQACC-02
Price: $6.50 + shipping, per 10-pack.
Availability: IN STOCK

Spring Button Clip, for Minelab Equinox Lower Rod

The spring button clip has a button diameter of 6mm, and is made of stainless steel.

Model Number: EQACC-03
Price: $2 + shipping.
Availability: IN STOCK

Rubber Washer, for CTX 3030 Lower Rod (Version 1)

This washer measures 7/8" in diameter, by 1/16" thick, and has a hole diameter of 3/8" (used on CTX 3030 lower rods produced prior to December, 2018).

Model Number: C3ACC-01
Price: $2 + shipping, per pair.
Availability: IN STOCK

Coil Cable Wrap

This roughly 8" length of coil cable wrap protects the coil cable from any rubbing or chafing, where it enters the rod.

Model Number: C3ACC-03
Price: $2 + shipping.
Availability: IN STOCK