Steve's Carbon-Fiber Metal Detector Rods and Shafts

Home Products What's New Gallery Testimonials About FAQ CarbonPro Shafts **NEW** Glass-Fiber Lower Rods Contact

The home of premium-quality, custom-made carbon-fiber metal detector rods, shafts, and sand-scoop handles

Minelab Equinox 600/800 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

Our lower rods for the Minelab Equinox 600/800 are slightly longer (1 3/4") than the factory rods, and made of 100% carbon-fiber tubes, with an injection-molded nylon "clevis" at the end. Our standard lower rod, designed for use with a "Steve's" upper shaft, does NOT include a spring button. If you are ordering the lower rod for use with a Minelab factory shaft, please specify when ordering (so that a spring button clip can be installed for stock-shaft compatibility).

Specifications:

Rod Length: 26 in. (custom-length "tall-man" rods are available upon request).
Rod Weight: 2.5 oz. (71 g)
Material: Carbon-fiber (twill pattern, glossy finish)
Lower Rod End (Clevis): Injection-molded, glass-filled nylon 6/6
Washer Material: Rubber

Price: $79 + shipping (black). Email to purchase!
Availability: IN STOCK

Minelab Equinox 600/800 "Tall Man" Custom-Length Carbon-Fiber Lower Rod

Have a question? Need a custom build?

Tell Steve what you're working with and what you need, and he'll get back to you. Don't worry about having every detail -- Steve would rather start the conversation than have you guess at numbers.

Leave this blank

What can Steve help with? Detector shaft -- upper, lower, or complete shaft Sand-scoop handle -- handle for a scoop you already own General question Name Email Detector or sand scoop -- make and model Tell Steve what you need Measurements (optional) outer diameter(s) of your shaft or scoop handle tube(s), overall length from end-to-end, when in use, etc.

This form can't take attachments. Any photos you wish to send (photos of the mounting location where the coil attaches to the lower rod, or the sand scoop attaches to the handle, are especially helpful) can be emailed to steve@stevesdetectorrods.com; these can be sent after you send this form, OR, you can always send them later, once Steve has replied via email to your request.

Prefer to contact Steve directly?
Email steve@stevesdetectorrods.com -- please send any photos here as well; the form can't take attachments. Steve typically responds within 12-24 hours, 7 days a week.

WHAT MOVES A QUOTE FASTEST

The exact make and model, including the variant
Photos of your existing equipment, from two or three angles
Outside diameter(s) of the shaft or handle you run now
Overall length, and the length you actually want

Missing a few of those? Send the request anyway. Steve would rather start the conversation than have you guess at numbers.